Fireplace (Large) PDF Print E-mail
Fireplace
Parts:
  • (2) 4x8 sheets of Luan
  • (1) 4x8 sheet of 1/2" particle board
  • (13) 1x3 studs
  • (1) 4x18 stud over 8'-2"
  • (3) 4x8 sheets of 1" pink foam
  • (2) 4x8 sheets of 1" beadboard foam
  • (1) 2x4 sheet of 1" beadboard foam
  • (4) Hinges
  • Wood screws
  • Staples
  • Wood glue
  • Construction adhesive
  • Various paint colors
  • Drywall mud
  • Foam cutting/carving tools
Description:

The first thing we built was a frame out of 1x3's and skinned the front and sides for the bottom section of the fireplace. We made the front two 1x3's flat and the back two 1x3's on edge; we did this so if the fire box is put in place, the 1x3 wouldn't be in the way.

We made it 4 inches shorter than a full 8-foot sheet so when the 2" thick foam pieces are glued to the ends it measures 8'-0" overall.

 

Last Updated on Thursday, 22 September 2016 10:52